Fishing rod
A fishing rod or a fishing pole is a tool used to catch fish, usually in conjunction with the pastime of angling, can also be used in competition casting. (Sustenance and commercial fishing usually involves nets). A length of fishing line is attached to a long, flexible rod or pole: one end terminates in a hook for catching the fish. A 'fishing pole' is a simple pole or stick for suspending a line (normally fastened to the tip), with a hooked lure or bait. They are most commonly made of fibreglass, carbon fibre or, classically, bamboo, and are the only fishing levers properly referred to as "poles". In contrast, 'fishing rod' refers to a more sophisticated casting tool fitted with line guides and a reel for line stowage. Fishing rods vary in action as well as length, and can be found in sizes between 24 inches and 20 feet. The longer the rod, the greater the mechanical advantage in casting.
Contents |
Types
Carbon fibre rods
These high-tech rods are commonly used for coarse fishing in Europe, they are made using a variety of different qualities of carbon fibre which is reflected in the price, the prices range from about £100 to £5,000.
Varying in length from 3 feet through to the longest at about 18.5 feet, they allow very precise positioning of the bait, which in turn enables good catches of fish with accurate feeding, catches of carp on fisheries in the UK frequently reach 90 kg (200 pounds) in a 5 hour match, mostly made up of carp ranging in size from 250 grams (0.5lb) to 1.3 kg (3lb) in weight.[1]...
Fly rods
Fly rods, thin, flexible fishing rods designed to cast an artificial fly, usually consisting of a hook tied with fur, feathers, foam, or other lightweight material. More modern flies are also tied with synthetic materials. Originally made of yew, green hart, and later split bamboo (Tonkin cane), most modern fly rods are constructed from man-made composite materials, including fibreglass, carbon/graphite, or graphite/boron composites. Split bamboo rods are generally considered the most beautiful, the most "classic", and are also generally the most fragile of the styles, and they require a great deal of care to last well. Instead of a weighted lure, a fly rod uses the weight of the fly line for casting, and lightweight rods are capable of casting the very smallest and lightest fly. Typically, a monofilament segment called a "leader" is tied to the fly line on one end and the fly on the other.
Each rod is sized to the fish being sought, the wind and water conditions and also to a particular weight of line: larger and heavier line sizes will cast heavier, larger flies. Fly rods come in a wide variety of line sizes, from size #000 to #0 rods for the smallest freshwater trout and pan fish up to and including #16 rods[2] for large saltwater game fish. Fly rods tend to have a single, large-diameter line guide (called a stripping guide), with a number of smaller looped guides (aka snake guides) spaced along the rod to help control the movement of the relatively thick fly line. To prevent interference with casting movements, most fly rods usually have little or no butt section (handle) extending below the fishing reel. However, the Spey rod, a fly rod with an elongated rear handle, is often used for fishing either large rivers for salmon and Steelhead or saltwater surf casting, using a two-handed casting technique.
Fly rods are, in modern manufacture, almost always built out of carbon graphite. The graphite fibres are laid down in increasingly sophisticated patterns to keep the rod from flattening when stressed (usually referred to as hoop strength) See St Croix ART. The rod tapers from one end to the other and the degree of taper determines how much of the rod flexes when stressed. The larger amount of the rod that flexes the 'slower' the rod. Slower rods are easier to cast, create lighter presentations but create a wider loop on the forward cast that reduces casting distance and is subject to the effects of wind. Fly Rods : Guide to Fly Rod Flex & Action. Furthermore, the process of wrapping graphite fibre sheets to build a rod creates imperfections that result in rod twist during casting. Rod twist is minimized by orienting the rod guides along the side of the rod with the most 'give'. This is done by flexing the rod and feeling for the point of most give or by using computerized rod testing (see Fly Rod Balancing ).
See also Fly fishing.
Custom rod building is an active hobby among fly fishermen. See Fly rod building.
Tenkara rods
Tenkara rods are a type of fly rod used for tenkara fishing in Japan. A mixture of the rods in the other categories, they are carbon rods, fly rods and telescopic rods all in one. These are ultra-light and very portable telescopic rods (read more about telescopic below). Their extended length normally ranges from 11–13 feet, and they have a very soft action. The action of tenkara rods has been standardized as a ratio of "how many parts are stiffer : how many tip parts bend more easily". The standard actions are 5:5, 6:4, 7:3, and 8:2, with 5:5 being a softer/slower rod, and 8:2 being a stiffer rod.[3] Similar to western fly-rods tenkara rods also have cork, and sometimes even wooden handles, with wooden handles (such as red-pine, and phoenix-tree wood) being the more prized rods due to their increased sensitivity to fish bites and the heavier feel that helps balance the rods. Tenkara rods have no guides. Tenkara is a fixed-line fishing method, where no reel is used, but rather the line is tied directly to the tip of the rod. Like the carbon rods mentioned above this allows for "very precise positioning of the fly, which in turn enables huge catches of fish with accurate feeding". Tenkara fishing is very popular in Japan, where these rods can be found in every major tackle shop. In the US, tenkara is beginning to grow in popularity.
IM/Modulus
IM6, IM7, etc. are trade names for particular graphite produced by the Hexcel Corporation. These numbers are not industry standards nor an indication of quality, especially since other companies use the designations to refer to graphite not made by Hexcel. At best, they allow you to compare the quality of the material used to build different rods by the same manufacturer: an IM7 rod would use better graphite than an IM6 rod if both are made by the same manufacturer. It's more difficult to say the same about rods from two different companies, since they could be made from material from completely different manufacturers.
Modulus refers to the stiffness of the graphite, not the amount of material used or the number of graphite fibers incorporated into the sheets. Buying a rod based solely on the modulus rating is a mistake because other factors must be considered, for example, if the fisherman does not want the stiffest rod for light line techniques or cranking. In addition, other qualities must be incorporated in the graphite itself and the rod must be designed correctly to ensure the best performance and durability of the rod. The other components that go into a quality rod can also add significantly to the cost.
As of both IM and modulus, the higher rating, the lighter and more sensitive the rod is, however such rods also become more brittle due to time and usage.
The most effective use in bass fishing are IM and Modulus rods when one is using lures like worms and jigs. When using faster lures, such as spinnerbaits, and crankbaits, the fisherman does not need to have the sensitivity needed when using the slow lures. The theoretical reason for a more sensitive rod when using a slower lure is that many of the strikes (or more gentle "pickups") will be harder to feel with a rod of a lower modulus rating.
Spin and bait casting rods
Spin casting rods are rods designed to hold a spin casting reel, which are normally mounted above the handle (See Fishing reel). Spin casting rods also have small eyes and, not infrequently, a forefinger grip trigger. They are very similar to bait casting rods, to the point where either type of reel may be used on a particular rod. While rods were at one time offered as specific "spin casting" or "bait casting" rods, this has become uncommon, as the rod design is suited to either fishing style, and today they are generally called simply "casting rods", and are usually offered with no distinction as to which style they are best suited for in use. Casting rods are typically viewed as somewhat more powerful than their spinning rod counterparts - they can use heavier line and can handle heavier cover.
Spinning rods
Spinning rods are made from graphite or fibreglass with a cork or PVC foam handle, and tend to be between 5 and 8.5 feet (1.5 - 2.6 m) in length. Typically, spinning rods have anywhere from 5-8 large-diameter guides arranged along the underside of the rod to help control the line. The eyes decrease in size from the handle to the tip, with the one nearest the handle usually much larger than the rest to allow less friction as the coiled line comes off the reel, and to gather the very large loops of line that come off the spinning reel's spool. Unlike bait casting and spin casting reels, the spinning reel hangs beneath the rod rather than sitting on top, and is held in place with a sliding or locking reel seat. The fisherman's second and third fingers straddle the "leg" of the reel where it is attached to the reel seat on the rod, and the weight of the reel hangs beneath the rod, which makes for a more comfortable way to fish for extended periods. This also allows the rod to be held in the fisherman's dominant hand (the handle on most modern spinning reels is reversible) which greatly increases control and nuance applied to the rod itself. Spinning rods and reels are widely used in fishing for popular North American sport fish including bass, trout, pike and walleye. Popular targets for spinning in the UK and European continent are pike, perch, eel and zander (walleye). Longer spinning rods with elongated grip handles for two-handing casting are frequently employed for saltwater or steelhead and salmon fishing. Spinning rods are also widely used for trolling and still fishing with live bait.
Ultra-light rods
These rods are used to fish for smaller species, they provide more sport with larger fish, or to enable fishing with lighter line and smaller lures. Though the term is commonly used to refer to spinning or spin-cast rods and tackle, fly rods in smaller line weights (size #0 - #3) have also long been utilized for ultra-light fishing, as well as to protect the thin-diameter, lightweight end section of leader, or tippet, used in this type of angling.
Ultra-light spinning and casting rods are generally shorter (4 - 5.5 feet is common) lighter, and more limber than normal rods. Tip actions vary from slow to fast, depending upon intended use. These rods usually carry 1 to 6 pound (4.5 to 27 N) test fishing line. Some ultra-light rods are capable of casting lures as light as 1/64th of an ounce - typically small spinners, wet flies, crappie jigs, tubes, or bait such as trout worms. Originally produced to bring more excitement to the sport, ultra-light spin fishing is now widely used for crappie, trout, bass, bluegill and other types of panfish.
Ice rods
Modern ice rods are typically very short spinning rods, varying between 24 and 36 inches in length. Classic ice rods - still widely used - are simply stiff rod-like pieces of wood, usually with a carved wooden handle, a couple of line guides, and two opposing hooks mounted ahead of the handle to hand-wind the line around. Ice rods are used to fish through holes in the cover ice of frozen lakes and ponds.
Sea rods
Sea rods are designed for use with huge fish from the ocean. They are long (around 4 metres on average), extremely thick, and feature huge and heavy tips, eyes, and handles. The largest of sea rods are for use with sport fishing boats. Some of these are specialized rods, including shark rods, and marlin rods, and are for use with very heavy equipment.
Surf rods
The most common type of sea rods are for surf casting. Surf casting rods resemble oversized spinning or bait casting rods with long grip handles intended for two-handed casting techniques. Generally between 10 to 14 feet (3 - 4 m) in length, surf casting rods need to be longer in order for the user cast the lure or bait beyond the breaking surf where fish tend to congregate, and sturdy enough to cast heavy weighted lures or bait needed to hold the bottom in rough water. They are almost always used in shore fishing (sea fishing from the shoreline) from the beach, rocks or other shore feature. Some surfcasters use powerful rods to cast up to six ounces or more of lead weight, artificial lures, and/or bait over one hundred yards.
Trolling rods
Trolling is a fishing method of casting the lure or bait to the side of, or behind, a moving boat, and letting the motion of the boat pull the bait through the water. In theory, for light and medium freshwater gamefishing, any casting or spinning rod (with the possible exception of ultralight rods) can be used for trolling. In the last 30 years, most manufacturers have developed a complete line of generally long, heavily built rods sold as "Trolling Rods", and aimed generally at ocean anglers and Great Lakes salmon and steelhead fishermen. A rod effective for trolling should have relatively fast action, as a very "whippy" slow action rod is extremely frustrating to troll with, and a fast action (fairly stiff) rod is generally much easier to work with when fishing by this method. Perhaps the extreme in this philosophy was reached during the 1940s and early 1950s, when the now-defunct True Temper corporation - a maker of garden tools - marketed a line of trolling rods of 4.5 to 5 ft length made of tempered steel which were square in cross section. They acted as excellent trolling rods, though the action was much too stiff for sportsmanlike playing of fish once hooked. As Great Lakes sportfishing in particular becomes more popular with each passing year, all rod manufacturers continue to expand their lines of dedicated "trolling" rods, though as noted, for most inland lake and stream fishing, a good casting or spinning rod is perfectly adequate for trolling.
Telescopic rods
Telescopic fishing rods are designed to collapse down to a short length and open to a long rod. 20 or even 30 ft rods can close to as little as a foot and a half. This makes the rods very easy to transport to remote areas or travel on buses, compact cars, or public buses and subways. Telescopic fishing rods are made from the same materials as conventional one or two piece rods. Graphite and fiberglass or composites of these materials are designed to slip into each other so that they open and close. The eyes are generally but not always a special design to aid in making the end of each section stronger. Various grade eyes available in conventional rods are also available in telescopic fishing rods.
Care for telescopic fishing rods is much the same as other rods. The only difference being that one should not open the telescopic rod in manner that whips a closed rod into the open position rapidly. Whipping or flinging a telescopic fishing rod open may and likely will cause it to be difficult to close. When closing the rods make a slight twisting motion while pushing the sections together. Often the rods come with tip covers to protect the tip and guides.
Telescopic rods are popular among surf fishermen. Carrying around a 12 or 14 ft surf fishing rod, even in 2 pieces, is cumbersome. The shorter the sections the shorter they close, the more eyes they have, and the better the power curve is in them. More eyes means better weight and stress distribution throughout the parabolic arc. This translates to further casting, stronger fish fighting abilities, and less breaking of the rod.
History
Judging by stone inscriptions, fishing rods go back to ancient Egypt, China, Greece, Trinidad and Tobago, Rome and medieval England, where they were called "angles" (hence the term "angling" as a synonym for fishing). Prior to widespread availability of synthetic materials, such as fiberglass and graphite composites, fishing rods were typically made from split Tonkin bamboo, Calcutta reed, or ash wood, as it was necessary that they be made light, tough, and pliable. The butts were frequently made of maple, with bored bottom; this butt outlasted several tops. Handles and grips were generally of cork, wood, or wrapped cane. Guides were made of simple wire loops or, later, loops with ring-shaped agate inserts for better wear. Even today, Tonkin split-bamboo rods are still popular in fly fishing.
Rods for travelers were made with nickel-silver metal joints, or ferrules, that could be inserted into one another forming the rod. Some of them were made to be used as a walking cane until needed for sport. Since the 1980s, with the advent of flexible, yet stiff graphite ferrules, travel rod technology has greatly advanced, and multi-piece travel rods that can be transported in a suitcase or backpack constitute a large share of the market.
Modern design
In theory, an ideal rod should gradually taper from butt to tip, be tight in all its joints (if any), and have a smooth, progressive taper, without 'dead spots'. Modern design and fabrication techniques, along with advanced materials such as graphite, boron and fiberglass composites have allowed rod makers to tailor both the shape and action of fishing rods for greater casting distance, accuracy, and fish-fighting qualities. Today, fishing rods are identified by their weight (meaning the weight of line or lure required to flex a fully-loaded rod) and action (describing the location of the maximum flex along the length of the rod).
Modern fishing rods retain cork as a common material for grips. Cork is light, durable, keeps warm and tends to transmit rod vibrations better than synthetic materials, although EVA foam is also used. Reel seats are often of graphite-reinforced plastic, aluminum, or wood. Guides are available in steel and titanium with a wide variety of high-tech metal alloy inserts replacing the classic agate inserts of earlier rods.
Back- or butt-rests can also be used with modern fishing rods to make it easier to pull big fish off the water. These are fork-like supports that help keep the rod in position, providing leverage and counteracting tensions caused by a caught fish.
Specifications
There are several specifications manufacturers use to delineate rod uses. These include power, action, line weight, lure weight, and number of pieces.
Power
Also known as "power value" or "rod weight." Rods may be classified as Ultra-Light, Light, Medium-Light, Medium, Medium-Heavy, Heavy, Ultra-Heavy, or other similar combinations. Power is often an indicator of what types of fishing, species of fish, or size of fish a particular pole may be best used for. Ultra-light rods are suitable for catching small bait fish and also panfish, or situations where rod responsiveness is critical. Ultra-Heavy rods are used in deep sea fishing, surf fishing, or for heavy fish by weight. While manufacturers use various designations for a rod's power, there is no fixed standard, hence application of a particular power tag by a manufacturer is somewhat subjective. Any fish can theoretically be caught with any rod, of course, but catching panfish on a heavy rod offers no sport whatsoever, and successfully landing a large fish on an ultralight rod requires supreme rod handling skills at best, and more frequently ends in broken tackle and a lost fish. Rods are best suited to the type of fishing they are intended for.
Action
"Action" refers to the responsiveness of the rod to bending force (bending curve), and the speed with which the rod returns to its neutral position. An action may be slow, medium, fast, or a combination (e.g. medium-fast.) Fast Action rods flex most in the tip section. Slow rods flex more towards the butt of the rod.
The construction material and construction method of a rod affects its action. Action, however, is also often a subjective description of a manufacturer; some manufacturers list the power value of the rod as its action. A "medium" action bamboo rod may have a faster action than a "fast" fiberglass rod. Action is also subjectively used by anglers, as an angler might compare a given rod as "faster" or "slower" than a different rod.
A rod's action and power may change when line weight is greater or lesser than the rod's specified range. When the line weight used greatly exceeds a rod's specifications a rod may break before the line parts. When the line weight is significantly less than the rod's recommended range the line may part prematurely, as the rod cannot fully flex to accommodate the pull of a given weight fish. In fly rods, exceeding weight ratings may warp the blank or have casting difficulties when rods are improperly loaded.
The action refers to how much a rod bends when a fisherman is casting or have a fish at the end of the line. An extra fast action rod bends just at the tip. A fast action bends in the last quarter of the rod. A moderate-fast action rod bends over the last third. A moderate action rod bends over the last half. A slow action rod bends all the way into the handle. Fast action rods put more force into the throw and give the fisherman longer casts. Softer action rods are more forgiving and have less tendency to throw live bait from the hook
Line weight
A rod is usually also classified by the optimal weight of fishing line or in the case of fly rods, fly line the rod should handle. Fishing line weight is described in pounds of tensile force before the line parts. Line weight for a rod is expressed as a range that the rod is designed to support. Fly rod weights are typically expressed as a number from 1 to 12, written as "N"wt (e.g. 6wt.) and each weight represents a standard weight in grains for the first 30 feet of the fly line established by the American Fishing Tackle Manufacturing Association. For example, the first 30' of a 6wt fly line should weigh between 152-168 grains, with the optimal weight being 160 grains. In casting and spinning rods, designations such as "8-15 lb. line" are typical.
Lure weight
A rod may also be described by the weight of lure or hook that the rod is designed to support. Lure weight is usually expressed in ounces or grams.
Number of pieces
Rods that are one piece from butt to tip are considered to have the most natural "feel", and are preferred by many, though the difficulty in transporting them safely becomes an increasing problem with increasing rod length. Two-piece rods, joined by a ferrule, are very common, and if well engineered (especially with tubular glass or carbon fiber rods), sacrifice very little in the way of natural feel. Some fishermen do feel a difference in sensitivity with two-piece rods, but most do not.
See also
- Composite materials
- Fishing reel
References
- ↑ Fishing Tackle
- ↑ Johnson, Paul, Sage Manufacturing News Release of 16-weight 1680-4 Xi2 Saltwater Fly Rod, 24 August 2005
- ↑ Tenkara USA, About Tenkara
External links
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
